Monday, October 2, 2017

UPDATE: For Sale: Benchcrafted Classic Workbench


We have for sale a freshly-built-to-spec example of our Classic Workbench. Made entirely of hard rock maple, it's outfitted with our Classic Leg Vise w/Crisscross, Planing Stop and one Hand-forged Holdfast, For full specs and photos, see our Classic Workbench Plans page. This bench is built exactly to the specs listed.

The bench is in the white, that is, we didn't apply any finish to any of the surfaces. You can either leave it that way or apply a finish of your choice (we hope you leave the top unfinished, or at most one coat of oil.) The bench is completely assembled and ready to use. 

The Benchcrafted Classic Workbench is constructed entirely with in-compression-for-eternity drawbored mortise and tenon. It's as solid as humans can make it, short of growing a tree in the shape of a bench. The bench is built to the highest standards of traditional German craftsmanship in the utopian village of Amana Iowa. Our collaboration with the craftsmen in Amana, along with our experience in traditional workholding has yielded a workbench that is truly heirloom quality, but offered at what we think is a very reasonable price. There are other bench makers out there who are offering stunning museum-quality, marquetry-encrusted benches with our hardware and designs (Frank Strazza and Mark Hicks among others.) We consider our flagship Split-Top Roubo as nearing the pinnacle of bench design (if there is such a thing) but we wanted to offer an essential bench built to high standards--an approachable but bulletproof tool for passionate enthusiasts that are perhaps just getting into the craft. Our principle bench maker has been building furniture at the Amana Furniture Shop for nearly 50 years. Needless to say, 150 years of woodworking tradition in Amana directly back to 19th century Germany speaks for itself. Many of the Amana craftsmen are multi-generational woodworkers.

The bench is available for pickup in eastern Iowa (contact us for details) or white glove delivery, in which the bench is wrapped in moving blankets, transported in a moving van used for furniture delivery only, then unloaded at your address and brought inside by the delivery techs. It costs a bit more to ship this way, but less than you might imagine.

Price is $2600. Delivery fees extra. 

If you're opening a school, community shop, woodworking club or refitting an existing facility with worn out or poor quality benches, please contact us, we can supply you. 

To purchase this bench, send us an email with your contact info to: info@benchcrafted.com

Tuesday, August 22, 2017

Handworks

Just a short compilation video from Handworks 2017


Wednesday, August 16, 2017

Videos: Build A Bench With Our Hardware


Image courtesy of Lost Art Press

We're often asked if we'll ever offer a bench building video, or complete videos on how to install our vises. And the answer is, not anytime soon. You may be wondering if this is shortsightedness on our part, lack of interest, or that we're too cheap to shell out the money for a video studio, which is significant. The reason is, there are others out there who can do it better than us. Here they are.

Marc Spangulolo, aka The Wood Whisperer
https://thewoodwhispererguild.com/product/split-top-roubo-workbench/

Marc was the first to make a serious video on building our Split Top Roubo. Marc's video skills and presentation are excellent. You won't find a more comprehensive and easy to follow series than Marc's. For $110 you get almost 10 hours of instruction covering every aspect of the build, and the vise installation, along with printed plans. It's an excellent value. Marc also includes videos on retrofitting a Crisscross and our latest Glide, in addition to the original Glide leg vise. 

Chris Schwarz and Will Myers

In this video ($35) Chris and Will not only build a bench together (featuring our Classic Leg Vise), but discuss different ways of getting there. There's some pretty funny moments too. Definitely worth the watch even if you're not building a bench. 

Guido Henn at Fine-Tools.com
https://www.youtube.com/watch?v=sZ4doJvy_5w

Guido has two excellent videos (in German) on the installation of our Glide Leg Vise and Tail Vise. Although the videos are in German, they are mostly without narration and subtitles, and the video quality is excellent, providing a clear view of each step of the process. The third video is a tour of the bench, in English. 

Matt Estlea

Matt studies furniture making in Oxford, England. Follow along as he build "Bertha" his Roubo bench outfitted with Benchcrafted vises. Excellent production quality.

KC Woodworks

Some good enthusiast content here. Watch as Kev makes a Hi Vise and retrofits a friend's bench with a Glide. 

Tom Fidgen

Not so much an instructional video, but nice to watch nonetheless. Very relaxing. Watch Tom build and assemble a Moxon vise entirely with hand tools. 

Mike Bandte

An ongoing series of Mike's Split Top Roubo build, in German. Mike also has a series on building our Moxon vise. 

There are many others out there, and a "Benchcrafted" search on Youtube will yield loads of results.






Thursday, June 15, 2017

There and Back Again.........Moxon wood

A few years ago we offered complete Moxon kits, the hardware and all the wood needed to make a complete vise, milled and ready to go.  It wasn't fancy, but all the parts were there to spec and all the holes drilled.  We offered this mostly because there was a demand.

At some point we got so busy we simply couldn't do this anymore, other things were taking our time.  We still get requests though, so in that vein, we are now offering these kits once again.  The new kits are a shade nicer than the old ones, still made from hard maple but these are finished just a smidgen better and the stabilizer batten now comes glued up to the rear chop.

So here wee are again, the complete kits are ala cart on our Store page.


Unsolicited Plug

We don't really plug other products much.  But on occasion we like to toot a horn about this or that.

At Handworks recently we met Janet Switzer of Camp Robber canvas.  We immediately liked her wares and started thinking of things to make.

One of the things on the top of our list was a flat bottomed satchel in heavy duty waxed canvas for the trunk of our cars.  I shot her some dimensions and within a week (!) had a bag in my hand.  Not only was it spot on what I had in mind but it is built like a tank.  I can't imagine it ever wearing out.  These would make an excellent tool bag.

Her Instagram is here and her Etsy store is here.






Video: Swing Away Seat



We shot this short video to show our new Swing Away Seat in action. We have them in stock and ready to ship.

Further details here.

Tuesday, June 13, 2017

Lost and Found: temporary post

We're going to leave this post up for a short while only.

Someone left a camcorder battery (looks to big for an SLR) on our bench at Handworks.

If this is yours let us know.



Monday, June 12, 2017

Swing Away Seat Instructions


We've uploaded the installation instructions for the Swing Away Seat. We offer some tips and guidelines for installation, as well as fastener recommendations (which are not included with the seat.) We suggest you read up on the installation while waiting for you seat to arrive so you can have your hardware in house when the seat arrives.

Download the document here.

Also available on our downloads page.

Thursday, June 1, 2017

New Mag-Bloks

A week of new stuff in our Store page.

Brand new Mag-Bloks, Quartered White Oak, Quartered Sycamore and Spalted Maple now regular stock items.  Clockwise from upper left:  Quartered Sycamore, Spalted Maple, Quartered Oak.



For Sale: Fresh Classic Workbench


We have for sale, for immediate delivery or pickup, a freshly-built-to-spec example of our Classic Workbench. Made of hard rock maple (rock on!) it's outfitted with our Classic Leg Vise, Planing Stop, Hand-forged Holdfast, and Swing Away Seat. For full specs, see our Classic Workbench Plans page.

This bench was completed a couple weeks ago on May 15, displayed in our booth at Handworks, then placed back in storage. The bench is in the white, that is, we didn't apply any oil/varnish shellac to any of the surfaces. You can either leave it that way or apply a finish of your choice (we hope you leave the top unfinished, or at most one thin coat of oil.)

The bench is assembled entirely with in-compression-for-eternity drawbored mortise and tenon. It's as solid as humans can make it, short of growing a tree in the shape of a bench.

The bench is available for pickup near Cedar Rapids, IA (contact us for details) or white glove delivery, in which the bench is wrapped in moving blankets, transported in a moving van used for furniture delivery only, then unloaded at your address and brought inside by the delivery techs. The first time you touch the bench will be to use it. It costs a bit more to ship this way, but less than you might imagine.

Price is $2600. Delivery fees extra. Contact: info@benchcrafted.com SOLD